Valspar Spray Applied Architectural Coating Summary

Valspar Spray Applied Architectural Coating Summary: Fluropon® Classic, Special & Premier; Super Fluroclear™; Acroflur™; Flurocryl™; Dynapon®


 
Spray Applied Coatings VALSPAR SPRAY APPLIED ARCHITECTURAL COATINGS SUMMARY

Product Name

Formula

End Use

Durability and Positioning

Resin Type Percentage

Industry Consensus Spec.

Colors

Applied Cost Comparison

Number of Coats

Clear Coat***

Film Hardness

Mix and Match™ System Gloss Range

Film Thickness (MILS)

 

Fluropon®

39CL###

This coating was designed for use on monumental structures, high rise and landmark buildings and other similar structures that need a coating that will retain its original appearance over a long life cycle.

This product contains 70 fluoropolymer resin thus providing the best protection against fading and chalking in high ultraviolet environments.

The resin system of this coating is a minimum of 70 fluoropolymer (PVDF) (Kynar 500® or Hylar 5000®) resin. AAMA 2605

Earth tones are the most popular color range offered in this paint system.

Dollar signs are a general guideline of comparative initial application costs and materials.

This paint system consists of two coats. Clear Coat Optional F Min.

Mix and Match System

25 to 35 Primer: 0.2 to 0.4
Topcoat: 1.0 to 1.3
 

Fluropon Classic® II

399L###

This coating was designed for use on monumental structures, high rise and landmark buildings and other similar structures that need a coating that will retain its original appearance over a long life cycle. This product contains 70 fluoropolymer resin thus providing the best protection against fading and chalking in high ultraviolet environments. The resin system of this coating is a minimum of 70 fluoropolymer (PVDF) (Kynar 500® or Hylar 5000®) resin. AAMA 2605

Sparkle in paint system is achieved by the use of aluminum flakes. Clear top coat is NOT required.

Dollar signs are a general guideline of comparative initial application costs and materials.

This paint system consists of two coats.

Clear Coat Optional

F Min.

Mix and Match System

15 to 25 Primer: 0.3 to 0.4*
Topcoat: 1.0 to 1.5*
 

Fluropon Classic®

399L###

SL9L###

This coating was designed for use on monumental structures, high rise and landmark buildings and other similar structures that need a coating that will retain its original appearance over a long life cycle.

This product contains 70 fluoropolymer resin thus providing the best protection against fading and chalking in high ultraviolet environments. The resin system of this coating is a minimum of 70 fluoropolymer (PVDF) (Kynar 500® or Hylar 5000®) resin. AAMA 2605

Sparkle in paint system is achieved by the use of aluminum flakes. Clear top coat is always required on aluminum flake coatings.

Dollar signs are a general guideline of comparative initial application costs and materials.

This paint system consists of three coats.

Clear Coat Required

F Min.

No

30 to 40

Primer: 0.2 to 0.4
Topcoat: 1.0 to 1.3
Clear: 0.3 to 0.5
 
Fluropon Special®

38CL###

38CT###

This coating was designed for use on monumental structures, high rise and landmark buildings and other similar structures that need a coating that will retain its original appearance over a long life cycle.

This product contains 70 fluoropolymer resin thus providing the best protection against fading and chalking in high ultraviolet environments. The resin system of this coating is a minimum of 70 fluoropolymer (PVDF) (Kynar 500® or Hylar 5000®) resin. AAMA 2605

Special bright pastel colors are available, but sometimes at additional cost. For these special colors, extra thick film, extra bakes or other unusual or more costly procedures or materials may be required.

Dollar signs are a general guideline of comparative initial application costs and materials.

Dollar signs are a general guideline of comparative initial application costs and materials.

This paint system consists of four coats.

Clear Coat Optional

F Min.

No

25 to 40

 

No standard film thickness, see technical data sheet for color selected.  
Special bright white colors are available, but sometimes at additional cost. For these special colors, extra thick film, extra bakes or other unusual or more costly procedures or materials may be required.

Fluropon® Premiere*

SLCL###

This coating was designed for use on monumental structures, high rise and landmark buildings and other similar structures that need a coating that will retain its original appearance over a long life cycle.

 

This product contains 70 fluoropolymer resin thus providing the best protection against fading and chalking in high ultraviolet environments.

This product contains 50 fluoropolymer resin. This product provides excellent protection against fading and chalking when exposed to moderate ultraviolet environments.

The resin system of this coating is a minimum of 70 fluoropolymer (PVDF) (Kynar 500® or Hylar 5000®) resin. AAMA 2605

Bright yellow, orange, blue, green, red (and more) are examples of bright colors offered in this paint system. Clear top coat is always required on brightly colored 70 PVDF coatings.

Dollar signs are a general guideline of comparative initial application costs and materials.

This paint system consists of three coats.

 

Clear Coat Required F Min.

Mix and Match System

30 to 40

Primer: 0.2 to 0.4 optional
Basecoat: 0.8 to 1.3 opt.
Topcoat: 1.0 to 1.3
Clear: 0.3 to 0.5
 

Super Fluroclear™

390X312

This coating was designed for use on monumental structures, high rise and landmark buildings and other similar structures that need a coating that will retain its original appearance over a long life cycle.

 

This product contains 70 fluoropolymer resin thus providing the best protection against fading and chalking in high ultraviolet environments. The resin system of this coating is a minimum of 90 fluoropolymer (PVDF) resin. AAMA 2605    

 

 

H to 2H

This product is resistant to scratches and abrasion caused by fabrication, transportation and installation.

No

30 to 40 Super Fluroclear™ is a clear topcoat. It is required over Fluropon Classic® and Fluropon® Premiere colors. It may be used as an option over any of our 70 PVDF Fluropon® Products.  

Acroflur™

73CL###

This product is ideal for exterior use on commercial and small office buildings, schools, retail centers, and more.

This product contains 50 fluoropolymer resin. This product provides excellent protection against fading and chalking when exposed to moderate ultraviolet environments.

The resin system of this coating is a minimum of 50 fluoropolymer (PVDF) (Kynar® or Hylar® ) resin. AAMA 2604

Earth tones are the most popular color range offered in this paint system.

Dollar signs are a general guideline of comparative initial application costs and materials.

This paint system consists of two coats.

This paint system consists of one coat.
Clear Coat Never

H to 2H

This product is resistant to scratches and abrasion caused by fabrication, transportation and installation.

Mix and Match System

25 to 35

Primer 0.2 to 0.4 opt.
Com. Topcoat 1.0
 to 1.4**
Res.
 Topcoat 0.8 to 1.0

 

Acrodize™

379L###

This product is ideal for exterior use on commercial and small office buildings, schools, retail centers, and more.

This product contains 50 fluoropolymer resin. This product provides excellent protection against fading and chalking when exposed to moderate ultraviolet environments. The resin system of this coating is a minimum of 50 fluoropolymer (PVDF) (Kynar® or Hylar® ) resin. AAMA 2604

Sparkle in paint system is achieved by the use of aluminum flakes. Clear top coat is NOT required.

Dollar signs are a general guideline of comparative initial application costs and materials.

This paint system consists of two coats.

This paint system consists of one coat.

Clear Coat Never

H to 2H

This product is resistant to scratches and abrasion caused by fabrication, transportation and installation.

No

25 to 35

Primer: 0.2 to 0.4 opt.
Com. Topcoat: 1.0 to 1.4**
Res. Topcoat: 0.8-1.0
 

Flurocryl™

KJC#####

This product is ideal for exterior use on residential projects and for interior use on all projects.

This product is ideal for exterior use on commercial and small office buildings, schools, retail centers, and more.

This coating is comprised of a polyester resin system that will provide production when exposed to moderate to low UV levels.

 

The resin system of this coating is acrylic and PVDF. AAMA 2603

Earth tones are the most popular color range offered in this paint system.

Dollar signs are a general guideline of comparative initial application costs and materials.

This paint system consists of one coat.

Clear Optional

2H to 4H

This product is resistant to scratches and abrasion caused by fabrication, transportation and installation.

Mix and Match System

30-60

0.8 to 1.2

 

 
Bright yellow, orange, blue, green, red (and more) are examples of bright colors offered in this paint system. Clear top coat is always required on brightly colored 70 PVDF coatings.

Dynapon®

PMC####

This product is ideal for exterior use on residential projects and for interior use on all projects.

This coating is comprised of a polyester resin system that will provide production when exposed to moderate to low UV levels. The resin system of this coating is polyester AAMA 2603

Earth tones are the most popular color range offered in this paint system.

Dollar signs are a general guideline of comparative initial application costs and materials.

This paint system consists of one coat.

Clear Coat Never

2H Min.

This product is resistant to scratches and abrasion caused by fabrication, transportation and installation.

No

10 to 80

0.8 to 1.2

 

Sparkle in paint system is achieved by the use of aluminum flakes. Clear top coat is NOT required.

 



           

Home   About Us   Contact Us   Services   Industries   Successes   FAQ   News & Events   Quote   Site Map