Trinar® Spray Finishes AAMA 2605-98 Performance PropertiesTrinar® Spray Finishes AAMA 2605-98 Performance Properties: Factory Applied, Baked-On Coating Solutions For Pigmented Organic Coatings |
|||
| AAMA 2605-98 | |||
| TRINAR® SPRAY FINISHES PERFORMANCE PROPERTIES | |||
| AAMA 2605-98* | |||
| For Superior Performance Organic Coatings on Architectural Aluminum Extrusions and Panels | |||
| Test | Description | Coating Requirements | TRINAR Performance |
| 7.1 | Color Uniformity | Visual Control | Instrument and visually controlled |
| 7.2 | Specular gloss at 60° ASTM D 523 | Medium and low gloss ranges | Controlled to customer spec +5 units |
| 7.3 | Dry film hardness, ASTM D 3363 | F minimum | H-2H No removal |
| 7.4 | Film adhesion (dry, wet and boilingwater), crosshatch 1/6 inch squares) | No removal between scribed lines | |
| 7.5 | Impact resistance (direct), 0.10 inch distortion | No removal of film | No removal |
| 7.6 | Abrasion resistance, ASTM D 968 | 20 liters per mil. | Exceeds spec. |
| 7.7.1 | Chemical resistance(1% muriatic acid) | 15 minutes, no visual changes | Meets or exceeds spec. |
| 7.7.2 | Chemical resistance (mortar, alkali) | 24 hours, no visual changes | Meets or exceeds spec |
| 7.7.3 | Resistance to acid pollutants (70% nitric acid) | 30 mins. Maximum 5 DeltaE | Meets or exceeds spec |
| 7.7.4 | Detergent resistance | 72 hours, no effect | Meets or exceeds spec |
| 7.8.1.1 | Humidity resistance ASTM D 2247 | 4000 hrs., few #8 blisters | Meets or exceeds spec |
| 7.8.1.2 | Salt spray resistance ASTM B 117 | 4000 hrs., minimum 7 rating on scribe and minimum blister rating of 8 (ASTM D 1654) | Meets or exceeds spec |
| 7.9.1.2 | Weathering, color retention ASTM D 2244 | 5 years, 45° South Florida maximum 5 DeltaE Hunter units color change. | Meets or exceeds spec |
| 7.9.1.3 | Weathering, chalk resistance ASTM D 4214 | 5 years, 45° South Florida, 8 rating for colors, 6 rating for whites | Meets or exceeds spec |
| 7.9.1.5.1 | Weathering, erosion resistance | 5 years, 45° South Florida, maximum 10% loss | Meets or exceeds spec |
| *To obtain complete specifications, contact AAMA at 847-303-5664. | |||
 |
|
|
Superior Metal Technologies, LLC
9850 East 30th Street
Indianapolis, Indiana 46229
800-654-9850
317-897-9850
info@superiormetals.us
Copyright © 2005. All Rights Reserved.
Home About Us Contact Us Services Industries Successes FAQ News & Events Quote Site Map